In the use of the carpenter carving machine, there may be a phenomenon that the suction table has no suction and cannot absorb the plate. What is the reason for this, what should be done? Today, we will introduce you to the treatment method of the carpenter carving machine table:
1. Is the motor line voltage normal?
2. Whether the water circulation air pump adds less water, whether the motor is stuck or not, and the rotating shaft of the motor fan protection net is removed;
3. Filtering and blocking in the vacuum pump;
4. The surface of the counter or pipe is trimmed by air leakage;
5, forward and reverse exchange motor, arbitrarily two lines change the direction of the motor.
The carpenter carving machine uses vacuum adsorption to fix the plate, not only can it be firmly fixed, it will not attack the movement and the wrong position, and it is fixed relative to the splint, which can save the plate and sculpt the edge of the plate, saving time and effort.
