Different stone engraving machines different functions

   There are many types of stone engraving machines, and there are different categories of analysis according to their different classification criteria. Divided from the power angle of engraving, the stone engraving machine is divided into a high-power engraving machine and a precision engraving machine. Two different types of engraving machines play different roles in the processing of stone. Generally a stone processing factory, both types need to be purchased.
    The high-power engraving machine, if it is in large-scale stone engraving, acts as a coarse adjustment. The power of this engraving machine is very large, and the design of the engraving knife is also relatively hard, which is very suitable for the cutting and engraving of large stone. In addition to serving as a rough carving machine in large-scale engraving, it is also suitable for lettering, but it is not suitable for precision engraving. Stone engraving machine manufacturers here remind you that because of the high power of this engraving machine, the required power is relatively high, and the power supply current is kept stable, and the noise will be relatively large when processing.
    The precision engraving machine is more used in the field of small stone carving. The use of this engraving machine is the most suitable for small stone carving. In addition to small stone carvings, among the large stone carvings, the precision engraving machine can complete the work of engraving, and the stone after cutting is more refined and more exquisite and beautiful.

What happened to the over-the-air alarm on the stone engraving machine? How to solve?

    Stone engraving machines are used more in the stone processing industry. There are many precautions in the operation of the equipment itself, and there are many problems to be aware of. For example, an over-range alarm occurs during the use of the device. What is going on? How should we solve it? Here is a brief introduction to the analysis that can be done when problems arise.
     The main reason for the over-range alarm of the stone engraving machine is that the machine has reached the limit position in the process of operation, which affects the use efficiency of the equipment. Therefore, basic inspection and elimination work should be done when using. First check whether the size of the design itself is within the processing range, check whether the motor shaft and the screw connection line of the machine are loose, check whether the machine and the computer are connected correctly, and also check whether the current coordinate value is already Exceeded the value range. Do a good job of these comprehensive checks to see where the problem is, so that the equipment can be effectively operated.
     The stone engraving machine manufacturer pointed out that in the process of using the engraving machine, there are actually many matters to be considered. When the overtravel alarm is encountered, as long as it can be adjusted according to different phenomena and kept in the jog state, it can be restored. The original state. In addition, if there is a need to move the workbench, it must be considered that the direction of movement must be far from the limit position, try not to be in a sensitive position, so as to avoid problems in the operation of the device itself.
     Basically, this is a matter that needs to be basically considered when encountering an over-range alarm in the engraving machine. It is possible to pay attention to these basic situations, and in use, it is also possible to reduce the possibility of occurrence of risks and maintain normal operation.