Stone engraving machines are used more in the stone processing industry. There are many precautions in the operation of the equipment itself, and there are many problems to be aware of. For example, an over-range alarm occurs during the use of the device. What is going on? How should we solve it? Here is a brief introduction to the analysis that can be done when problems arise.
The main reason for the over-range alarm of the stone engraving machine is that the machine has reached the limit position in the process of operation, which affects the use efficiency of the equipment. Therefore, basic inspection and elimination work should be done when using. First check whether the size of the design itself is within the processing range, check whether the motor shaft and the screw connection line of the machine are loose, check whether the machine and the computer are connected correctly, and also check whether the current coordinate value is already Exceeded the value range. Do a good job of these comprehensive checks to see where the problem is, so that the equipment can be effectively operated.
The stone engraving machine manufacturer pointed out that in the process of using the engraving machine, there are actually many matters to be considered. When the overtravel alarm is encountered, as long as it can be adjusted according to different phenomena and kept in the jog state, it can be restored. The original state. In addition, if there is a need to move the workbench, it must be considered that the direction of movement must be far from the limit position, try not to be in a sensitive position, so as to avoid problems in the operation of the device itself.
Basically, this is a matter that needs to be basically considered when encountering an over-range alarm in the engraving machine. It is possible to pay attention to these basic situations, and in use, it is also possible to reduce the possibility of occurrence of risks and maintain normal operation.
