Four methods of protecting tools and the impact of the environment

When carving stone, the stone engraving machine is very fast compared to hand-carving. The efficiency is incomparable to the manual by hand. The precision of the products processed by the stone engraving machine is far more than that of manual processing. Therefore, the tool of the stone engraving machine is very important in the selection. If the tool selection of the engraving machine is not good, the finished product will not appear very regular. So how to protect the stone engraving machine tool, let's analyze it briefly.
1. The reason for the engraving machine itself. If it is caused by the engraving machine itself, the main reason is that the speed of the Z axis is too fast, it is easy to break the knife, and the deformation of the tool holder is easy to break the knife. When purchasing the engraving machine, choose the spindle power, the general 4500W can be used for engraving the stone, the processing speed can be guaranteed, and the power can be saved. Therefore, in the stage where the stone engraving machine is not mature enough, it is necessary to consider the last stone carving knife with better quality.
2. The materials do not match. Just as diamonds are only suitable for engraving marble, engraving machines are limited. It is impossible for all print calligraphy to be engraved. The relationship between the service life of the cutter and the speed of the cutter is very large. The harder the stone requires very slow speed when the knife is used. If the speed is too fast, it will easily lead to the cutter being broken. A phenomenon occurs.
3. The working environment is waterproof. When carving large stone, there is a need to place some water next to the engraving machine. Because the stone engraving machine only needs to engrave large stone, the contact point between the tip and the stone is very long, and sufficient water is needed to relieve the friction. Heat.
4. Flexible feeding. In programming, it is necessary to ensure the flexible feed every time the knife is cut. The operator's requirement is to ensure the flexible feed every time the knife is cut during programming. The part of the tip is in contact with the object when it needs to be rotated.
The influence of environment on stone engraving machine
1, temperature. The temperature control range of the general engraving machine is between 0-45 degrees. If it is lower than 0 degree, the tap water used to cool the engraving head of the engraving machine will freeze, and the temperature of the engraving machine tip will not be lowered in time, which may affect the engraving. Use of the machine.
2, humidity. When the stone engraving machine is used, the relative humidity range is between 30% and 75%. Under too dry or too humid environment, there is no advantage to the engraving machine operation.
3. Dry environment. The air in winter is relatively dry, so after the winter, you should pay attention to the problem of keeping warm the engraving machine. After using it, you must remember that the water in the water pipe must be cleaned up and not processed in time. The next day's freeze will affect the normal operation of the engraving machine.

What should I master when using woodworking engraving machine?

Because many customers have never used an engraving machine before buying an engraving machine. As a newbie, you should pay attention to the following problems when learning the engraving machine.
1. Theoretical basis: The training work must start from the theoretical training work, and the operators must conduct practical operation training under the condition that the theoretical assessment is passed. If the theoretical training is not passed, it is absolutely impossible to conduct operational training.
2. The use of woodworking engraving tools: After the theoretical training, the training of the tools must be carried out. Operators must be aware of common tools, engraving motor speeds, travel speeds, precautions, etc. Operators must be familiar with the application of the tool.
3, the scope of application of the material: operators must be familiar with the application range of various materials, familiar with different materials, different thicknesses, different finished products and so on. Familiar with different engraving methods for different materials.
4. Operation of various software of woodworking engraving machine: After the above training, software training can be carried out. The training of the software is mainly concentrated in the field of user application; the aspects that are not required by the user can be self-learned according to the training manual. The software requirements are: various types of software layout, various operations, path generation, and the ability to quickly find path errors.
5. Machine operation training: After the above various trainings, after the training personnel explained and the operator's understanding and assessment: the operator's operation safety and operation precautions are trained, and the trainees in the operation safety matters After the signature is approved, the operator can perform machine operation training.
6, woodworking engraving machine operation of various precautions and training of engraving machine maintenance.