The difference between wood fault engraving machine line fault and mechanical fault and its solution

Woodworking engraving machine line failure
1. Performance: During the engraving process, the phenomenon of dislocation engraving and engraving in the opposite direction occur.
Solution:
In the case of power-on, quick and continuous clicks, if there is irregular motion, it is a "phase loss" fault. Check the line between the driver output and the stepper motor to find the broken line and reconnect the fault.
2. Performance: Manual, automatic control of the machine axis, the machine does not respond
Solution:
1 Check if the data cable is securely connected. If it is loose, please connect it properly.
2 Check if the drive line interface is loose or loose, and reconnect;
3 Check if the power supply line of the host is powered off


Woodworking engraving machine mechanical failure
 1. Performance: The machine has a pause during operation, accompanied by a crisp metal sound
Solution:
1 Remove the machine casing and check the corresponding end bearing for damage;
2 Check the guide rail slide to check if the steel ball is seriously worn and damaged, and check if the guide rail has deep scratches.
3 Check the screw for damage, separate the ball screw nut from the connected parts, and manually turn the nut to feel the difference.
2. In the process of engraving, there is a misalignment phenomenon, the stepper motor runs, but the mechanical non-reaction phenomenon, please check the coupling, whether it is damaged or loose.

The following points should be noted when selecting an engraving machine:

     First, the classification of engraving machine: From the functional point of view, the computer engraving machine is divided into two categories: small power engraving machine and high-power engraving machine. The low-power engraving machine refers to the engraving machine with less power of engraving motor (generally 80-200W). Because of its small power, the engraving motor can only be applied to fine machining with less cutting surface. For example: badges, sand table models, handicraft surface processing, etc. This type of engraving machine cannot perform high power engraving and cutting. The high-power engraving machine refers to an engraving machine with an engraving motor power of 700W or more. This type of engraving machine can not only perform low-power engraving, but also high-power engraving. For example: the production of crystal characters, all kinds of advertising signs, irregular cutting of sheet metal, processing of artificial stone. Because of its high power, it can cut 30mm thick plexiglass at a time or use high-power molding engraving with a forming knife. Some users are not aware of the high power and low power of the engraving machine. After watching the demonstration of the high-power engraving machine, they bought a low-power engraving machine with a slightly lower price because of the investment difficulties. As a result, only the badges of less than two yuan each (only a few cents in one area) can be engraved. For high-power carvings such as plexiglass signs, only others can be seen. The same investment, the same store cost, the same operation and other staff wages, but 80% of the engraving business can not do, not only reduces their own efficiency, but also in a very disadvantageous position in the competition. This is a must when choosing an engraving machine. If you are applying in this industry, be sure to purchase an engraving machine that can perform high-power engraving.
 Second, the brand of engraving machine: the production technology of engraving machine is much more complicated than the engraving machine. At the same time, the engraving machine is different from the engraving machine. This is why many cutting plotter manufacturers have been developing engraving machines very early and have never launched products. s reason. The engraving machine requires fine and stable, and if there is instability, it will cause serious material waste. Therefore, the purchase of products with strong manufacturers can reduce the possibility of waste and loss caused by machine failure.


      Third, carefully observe the operation demonstration of the engraving machine: the engraving of small characters can see the precision of the engraving machine, and the engraving of high power can see the application range of the engraving machine. If the precision of the engraving machine is very poor, then the edge roughness will occur when performing high-power engraving; if the resonance (vibration) occurs during high-power engraving, the precision of the engraving machine will be greatly reduced. If the engraving machine cannot perform high-power engraving, the application range of the engraving machine will be greatly reduced. Therefore, according to the demonstration of the engraving machine, the application range of the engraving machine is determined, which is the scope of your engraving business. The scope of application of the engraving machine directly determines whether it can bring you economic benefits.

      Fourth, the use of consumables and software for the engraving machine: the consumables of the engraving machine should be very low, the general engraving machine should be able to apply ordinary lathe processing tools, the price is only a dozen yuan. However, some engraving machines use special tools, which greatly increases the cost of consumables. The application of software is also very important. Some brands of engraving machine software are not fully functional, and the engraving machine cannot use other software. Other brands of engraving machines can use a variety of common software, as long as there is new software or a new feature upgrade of a certain software, these new technologies can immediately create benefits for you.