How to use the engraving machine to view the following situations, we can try the following methods:
1. If the downforce of the engraved object is too large, consider whether a conical cutter can be used. If the engraving machine diamond head moves too much during the engraving process, the pressure in front of the tool will form an engraved object.
mobile.
If you use an incorrect carving knife, it will cause the same problem.
A 90 degree or 100 degree diamond knife will engrave the material and move the material through the engraving process.
2. Can I check if the pliers or chucks selected for engraving are not used correctly?
At the same time, the wear condition of the engraving machine pliers or chuck can also lead to the misalignment of the engraved object.
If the pliers or chuck of the wood engraving machine is too tight, the moment the blade touches the engraved object will also cause the engraving to pop up.
3. Since the engraving machine is usually equipped with multi-function pliers or chucks, and they are made of iron, it is easy to damage or drop the engraved objects during the engraving process. Special attention should be paid to the use of engraving machines.
It is helpful to use some rubber caps or rubber tubes to secure the engraved objects.
4. Regarding the engraving of the plastic pattern, the transfer belt can be mounted on the back side of the engraved object, and the computer engraving machine sprays the glue on one side of the tape and sticks it to the surface that can be. After use, prevent the use of double-sided tape.
And leave a difficult to clean appearance.
Because the transfer tape is easily peeled off and liquefied.
With a special engraved strap, the side of the strap is more viscous than the other side, so you can move or change the plate at will.
Engraving machine sample
5. Regarding an engraved object having an irregular shape, the appearance seems to have been very tightly fixed, and it also oscillates back and forth when subjected to downforce.
At this point, you can try to place some scrap on the object to increase friction.
The engraving machine is also the packaging of the packaged items. Although the object is irregular, the package itself can be very regular and easy to fix, plus a small irregular shape.
Very easy to fix.
Maybe the trial tool fixes a part of the rule and discards its irregular parts.
