Stone engraving machine, the safe operation of woodworking engraving machine starts from the details:
1. Wear labor maintenance products before work. After the operation is completed. Female workers should wear a work cap or hair net, not allowed to wear a scarf, and it is forbidden to wear high heels. Do not wear gloves, do not smoke, do not chat with others, and concentrate on energy. It is strictly forbidden to play and fight in the workshop.
2. Before starting the woodworking machine, it is necessary to check whether the lubrication and protective devices of all parts of the machine meet the requirements.
3. Reasonable selection of tools and fixtures. When clamping precision workpieces or thinner and softer workpieces, the clamping method should be appropriate, and the force should be bitten properly to ensure that the clamping is firm and reliable. Do not tap hard, use a wooden hammer or pad to gently tap.
4 During operation, it is necessary to observe whether the workpiece-mounted stone engraving machine clamp is loose. If it is loose, stop immediately to prevent injury. When observing the workpiece during operation, the station stone engraving machine position should be appropriate.
5. When the woodworking engraving machine moves quickly, you should pay attention to the surrounding conditions to prevent collision.
6. If you encounter a number of woodworking engraving machine control woodworking engraving machine motor abnormally hot, the sound is not normal, etc., should immediately stop the engraving machine
7. Operation should be civilized, do not arbitrarily prevent tools, gauges, and workpieces on machine guides and workbenches. When the CNC engraving machine engraving machine (woodworking engraving machine) is running, it is forbidden to vibrate the rotating parts, and do not lean the body on the woodworking machine. It is not allowed to transfer items from above the machine running parts.
8. Obey the technical regulations, and do not arbitrarily modify the setting parameters and operating procedures of the manufacturer in the CNC system.
9. After the operation is completed, wipe the machine, clean the work site, and disconnect the power supply.
